Print Page - RS-3 shell removal

Title: RS-3 shell removal
Post by: stj_lc on November 02, 2015, 01:50:53 AM

I need to remove the shell from a new RS-3 as the decoder is not running properly. Instructions please.
Thanks
Dan

Title: Re: RS-3 shell removal
Post by: bapguy on November 02, 2015, 09:16:39 AM

Remove screw holding fuel tank on. There will be 2 screws visible. Removes these and the screw holding the couplers on. Remove couplers and body lifts off. Joe

Title: Re: RS-3 shell removal
Post by: stj_lc on November 02, 2015, 02:46:21 PM

Thanks--I was concerned that those were motor mounting screws. A smooth design with no tabs or twisting.

Bachmann Online Forum

Discussion Boards => HO => Topic started by: stj_lc on November 02, 2015, 01:50:53 AM