Print Page - Boiler removal for 0-6-0 with DCC and Smoke

Title: Boiler removal for 0-6-0 with DCC and Smoke
Post by: JWhite on February 16, 2016, 03:33:43 PM

Are there any tricks to this? I'm using one as the base model for an IC 0-6-0. I want to replace the cab and put a sound decoder in the tender I'm building. A lot of the removal of the cast on details will be easier with the boiler off the frame.

Anyone disassembled one?

Thanks

Title: Re: Boiler removal for 0-6-0 with DCC and Smoke
Post by: Hunt on February 16, 2016, 06:21:17 PM

Click Here (https://youtu.be/OtW8Gx_WxL4?list=PL9GxcpnVuIG-Cp_EKPxOeYNhSSWZORT1H) to view a segment of a Bachmann video -- it has how to.

Title: Re: Boiler removal for 0-6-0 with DCC and Smoke
Post by: JWhite on February 17, 2016, 02:01:33 AM

Thanks, the video showed me just what I needed.

Title: Re: Boiler removal for 0-6-0 with DCC and Smoke
Post by: JWhite on February 25, 2016, 08:02:50 PM

Another question. When removing the smoke unit (I'm going to discard it and add weight where it is) is it ok just to cut the wires? Does the wire to the decoder need to be hooked up somewhere?

Bachmann Online Forum

Discussion Boards => HO => Topic started by: JWhite on February 16, 2016, 03:33:43 PM