Hi,
I want to get Bachmann #50202 SP Daylight 4-8-4 engine. I would like to add a Tsunami 2 decoder into this unit, but not sure which one to get? Also would it be a plug n play, or would I have to solder the decoder in.
If I found the correct exploded diagram for that model, it should be fairly simple. I've installed a few Tsunami 2s into my locos.
https://www.bachmanntrains.com/home-usa/dwg/dwgs/H502X-IS001.PDF
The diagram shows a standard 8-pin socket for decoders with a matching plug.
The Tsunami 2s do not come with those plugs though, you'll need to solder one on or replace the wiring harness.
Either the TSU-1100 or TSU-2200 will work. The 1100 is easier to fit in tight spaces, but I prefer the 2200 if it will fit in your loco's tender.
I would advise the TSU-2200 'Steam 2' model if it will fit. It's pretty much the same as the smaller TSU-1100, but has two advantages:
Firstly, Soundtraxx sells a wiring harness with a 8-pin plug on the other end that is compatible with the TSU-2200. (Part number 810135)
Second, the TSU-2200 has a socket for a Current Keeper, which will prevent the sound from cutting out on uneven or dirty track.
A Current Keeper can also be added to a TSU-1100, but requires more soldering.
Also keep in mind that a speaker will need to be added to the tender. Soundtraxx sells them, but make sure you get one that is compatible with your decoder's output.