Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: roybrownson on May 25, 2020, 09:22:24 AM

Title: Ho nickel silver with grey roadbed ez track questions
Post by: roybrownson on May 25, 2020, 09:22:24 AM
I am trying to make a ho half circle 24" radius using the Bachmann nickel silver ez track with grey roadbed. It is going on the inside of my half circle 26" radius ez track curve. Can anyone help. Thanks, Roy Brownson Jr in Syracuse, Utah, USA.
Title: Re: Ho nickel silver with grey roadbed ez track questions
Post by: WoundedBear on May 25, 2020, 10:17:51 AM
What do you need help with? Your posting doesn't make a lot of sense. I think the edges of your plastic roadbed are going to be very close together. A 22" radius might be a better choice for clearance.

Sid
Title: Re: Ho nickel silver with grey roadbed ez track questions
Post by: Trainman203 on May 25, 2020, 12:15:25 PM
You say what you are doing, never state a problem,  then ask for help.

Help with what?  If we knew what the issue was, someone would know an answer.
Title: Re: Ho nickel silver with grey roadbed ez track questions
Post by: Terry Toenges on May 25, 2020, 12:15:42 PM
This is what you would have if you used 22" radius on the inside. That only gives you 2" between tracks. You could use short straight fitter pieces to enlarge the inner part but then that gives you less than 2" between tracks. Disregard that 6 on the right side. I thought I had deleted it.
(https://scontent-ort2-1.xx.fbcdn.net/v/t1.0-9/98467923_10158466357765522_8792774395467661312_n.jpg?_nc_cat=103&_nc_sid=e007fa&_nc_ohc=5mGDy-Uj9SEAX-ofD-V&_nc_ht=scontent-ort2-1.xx&oh=fbbe9057936e0df6c7163f89ed951c97&oe=5EF024A0)