Print Page - Diagram request

Title: Diagram request
Post by: rosania5 on December 17, 2023, 10:26:04 PM

I have an old Chessie C&O 7071 engine that is not working, I bought it in parts and need a diagram to put it back together. I tried to add a picture.
it is a round motor with springs on top
thanks
Anthony
[email protected]

Title: Re: Diagram request
Post by: Len on December 18, 2023, 01:19:02 AM

It sounds like the old 'pancake' motor F9 that used the front truck for power pickup and the rear truck for the motor and drive. This is the Santa Fe version, but if the motor inside look like this, it's really not worth messing with. They didn't run that well and don't have much pulling power.

(https://1.bp.blogspot.com/-JRmLAMdzz9M/XdR16aoVCbI/AAAAAAAAG7c/FI6--HscpGkDedS3mLAzcAoMDXIRA4BigCLcBGAsYHQ/s1600/pancake2.JPG)

Len

Title: Re: Diagram request
Post by: rosania5 on December 18, 2023, 01:02:19 PM

Thanks Len but that is not the motor, it is a round motor. I did not think it was anything decent but I sill want to try to get it going...thanks for trying..
Anthony

Title: Re: Diagram request
Post by: Len on December 18, 2023, 01:45:49 PM

Then it might be like this one:
https://www.bachmanntrains.com/home-usa/dwg/dwgs/11702.pdf

Len

Title: Re: Diagram request
Post by: rosania5 on December 18, 2023, 04:47:23 PM

Len,
Thank you for the help and yes that is what I have.
Anthony

Title: Re: Diagram request
Post by: jward on December 18, 2023, 05:56:08 PM

I just bought one of those off ebay. They are nice running engines once you yours back together. Best thing is, most of the parts are available from the parts store.

Bachmann Online Forum

Discussion Boards => HO => Topic started by: rosania5 on December 17, 2023, 10:26:04 PM