Hi Ya'll! I wanted to share the progress of my elevated train. My concept was to have a layout that appears to be "floating". The track portion is complete, and I have had numerous successful loops without incident. Now I am only running the locomotive and tender because I have not yet purchased a sufficient power supply and am using the Bachmann controller that came with my Cow Catcher train set. The first two links are photos, first one shows the 3-degree pitch on the straights that keep the train leaning towards the wall. The track transitions into the curve to flat then back to 3-degrees, etc. The second photo shows a wide angle of the elevated track. The third link is just a short video of one loop around. Next step is power supply, adding cars (weighted as suggested by Greg Elmassian) followed by scenery (corners will have little scenes, straights bushes, trees, etc. and some scenic backdrops) Anyway, that's my vision so far, just wanted to share! Please let me know if links don't work :D
https://go.screenpal.com/watch/cZ6YFYVWMmY
https://go.screenpal.com/watch/cZ6YbRVWMEJ
https://go.screenpal.com/watch/cZ6YbRVWMEL
The links all worked with no problems at all. I see you have done a great job getting the supports and track installed. The video showed the smooth operation of the locomotive typical of well laid track. I was impressed by the quality of your work and appreciative of your efforts to share with the forum. Please keep us informed from time to time of your continued efforts!
All the best and keep having fun with your trains.
Bill
Very clean setup!
Thanks Greg! I ordered some weights (4oz each) for my boxcars to place over each axel. I think you are spot on regarding your previous suggestion. I really appreciate the input from this forum.
Thanks to you as well Loco Bill! Your encouragement and insight are very valuable to all on this forum!