I bought a non working used 4-4-0 at a train show with the hope of getting it running and converting it to radio control battery power. The previous owner tried to do the same but was unable to complete a working conversion. I have the Bachmann RC Wiring Connection diagram which shows the control boards I have removed the running gear from the boiler but I do not know how to access the control boards in the boiler.I want to trace each wire to know where I need to make my hookups from the tender. Can someone please tell me how to access the control boards. Thank you
So, do you have the 3 PDF files associated with this loco?
The owners manual shows an exploded diagram, not very detailed but should help you figure out how to take apart.
The other 2 wiring diagrams show pretty much the same thing, the approximate location of the boards, and wiring between the components.
If you don't have them, I would get them.. if they are not on the site here, then I can mail them to you.
Greg
Thank you for your reply. I have the owner's manual and a Bachmann "DC Wiring Connection" diagram for the 4-4-0 but neither shows how to get inside the boiler tube to access the PC boards. I cannot find any screws on the outside to open up the tube and I do not see a way to remove the smoke box front to access the end entrance to the boiler tube. From what I see all the control PC boards are inside the boiler tube. If there is other Bachmann information available I would like to find out how I can get a copy because repair will be - I believe - impossoble with access to the boards to trace wires.