Text only | Text with Images

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: Blind on March 25, 2026, 12:11:27 AM

Title: EZ Command 5 amp power supply and the Digitrax Zephyr
Post by: Blind on March 25, 2026, 12:11:27 AM
Is it possible to hook up the Digitrax Zephyr to the E-Z Command 5 amp power booster? According to the instructions it says to contact you about connecting the 2 together. I have a cable that came with the power supply that is supposed to allow DCC hook up. I just need to know where to connect the 2 wires to the Digitrax Zephyr.
Title: Re: EZ Command 5 amp power supply and the Digitrax Zephyr
Post by: Len on March 25, 2026, 04:57:06 PM
The wire end of the cable connects to "Rail-A" and "Rail-B" on the grey Zephyr terminal block.

Len
Title: Re: EZ Command 5 amp power supply and the Digitrax Zephyr
Post by: Blind on March 25, 2026, 11:24:18 PM
Thank You very much Len. Everything is a go now!
Title: Re: EZ Command 5 amp power supply and the Digitrax Zephyr
Post by: Len on March 26, 2026, 10:41:53 AM
No problem. If you do not have one, the manuals for all versions of the Zephyr are available on the Digitrax site.

Len
Text only | Text with Images