I have a 22"radius ho track oval with three straight pieces and one 3" piece on each side. I want to connect them in a concentric oval using a single atlas manual switch and 18" radius track for the inner oval. How do I do this?
Is it possible to achieve a consistent distance between the outer and inner tracks without using flex track?
Thank you,
William
If you are using all Atlas track you could do something like this:
(https://hosting.photobucket.com/e9b0c4ed-82e4-4f67-8233-f76b4e34e24d/3e57e027-7564-4261-bf37-51e5fc363a7f.jpg)
It can be done with EZ-Track, but the fitter pieces will come out different because of slight differences in the geometry of the switches.
Len