Can someone recommend an analogue power pack to control my remote turnouts?
If you are handy with clipping/stripping/connecting wires, you could just use a wall-wart transformer from some old unused electronic toys.
12 to 16 V AC output should work. Activate the switch motors for only a very short time.
A DC power pack output of 12 volts would probably work, too. Any old HO powerpacks lying around?
Otherwise, Bachmann power pack 44212 should suffice. It has 2 push-insert-release wire terminals for AC accessories. I have some new.
Contact me off line: joebarbATwwtDOTnet
Hope this helps.
Joe Satnik