Text only | Text with Images

Bachmann Online Forum

Discussion Boards => HO => Topic started by: hbriscoe44 on January 14, 2009, 06:30:02 PM

Title: Hooking up Accessories on Bachman DCC controller
Post by: hbriscoe44 on January 14, 2009, 06:30:02 PM
How do I hook up my switches to the Bachman DCC controler?
Title: Re: Hooking up Accessories on Bachman DCC controller
Post by: Tylerf on January 14, 2009, 07:48:19 PM
It theres no ac slots in it and i dont believe there are, youll have to either find another powerpack(even just a cheap old one that has the ac slots and use that. It you can find a transformer with the appropriate voltage and hook that up directly to the accesories. Ive done bother on my layout and you can usually find a used bin of power packs at hobby shops.
Title: Re: Hooking up Accessories on Bachman DCC controller
Post by: the Bach-man on January 14, 2009, 10:26:33 PM
Dear HB,
If you daisy chain a Bachmann analog pack to your EZ Command, you will not only get AC terminals, but you will now run your analog loco on this pack as well, freeing up address 10 on the EZ Command.
Have fun!
the Bach-man
Title: Re: Hooking up Accessories on Bachman DCC controller
Post by: boomertom on January 27, 2009, 02:42:31 PM
Any specific Bachmann analog Power pack?
Title: Re: Hooking up Accessories on Bachman DCC controller
Post by: Joe Satnik on January 27, 2009, 03:56:37 PM
Dear Boomer,

http://www.bachmanntrains.com/home-usa/products.php?act=viewProd&productId=209

I have some new. If you are interested, contact me at:  joebarbATwwtDOTnet 

Please include a zip code.

Hope this helps.

Sincerely,

Joe Satnik
Text only | Text with Images