I have a question concerning the Spectrum DCC ready locomotives. Do they come with the NMRA standard 8 pin plug or are they pre-wired for the decoder without the plug?
Thank you in advance!
Reinhard S.
Usually those with tenders have 8 pin NMRA sockets. I know the 0-6-0T and 44 ton you need to sodler the wires to seven pins on a PC board in the loco. Look at the Product Reference diagrams.
Rich
Correction, the 0-6-0T has a 9 pin JST connector. You can also unsolder the JST connector and solder in a decoder if room is at a premium.