Print Page - Scene Scapes Trees

Title: Scene Scapes Trees
Post by: Menneset on January 24, 2009, 07:24:03 PM

Anyone have any tips on removing the "removable" base from the Scene Scapes trees? On the set I have the base is very firm and does not want to budge, I am hesitant to try to force it.

Thanks.

Title: Re: Scene Scapes Trees
Post by: SteamGene on January 24, 2009, 09:23:52 PM

I haven't seen them, but perhaps wire dykes with the flat blade against the base. Drill a shallow hole and then fill with Elmer's.
Gene

Title: Re: Scene Scapes Trees
Post by: the Bach-man on January 26, 2009, 12:16:37 PM

Dear Menneset,
I use a pair of pliers to twist them off. Score so far: Bach-man Several hundred Trees 0 !
Have fun!
the Bach-man

Title: Re: Scene Scapes Trees
Post by: CNE Runner on January 27, 2009, 12:34:39 PM

Another suggestion is to glue a small straight pin into the truck (after the base is removed). This will allow you to easily secure the tree to your senic material (I use Styrofoam insulation material).

Ray

Title: Re: Scene Scapes Trees
Post by: Menneset on January 29, 2009, 01:08:57 PM

okey-doky, pliers and dykes I have in abundance.

Thanks guys!

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: Menneset on January 24, 2009, 07:24:03 PM