Print Page - DCC Locomotve Lurches

Title: DCC Locomotve Lurches
Post by: WRC on January 29, 2011, 04:08:23 PM

Hi. I have installed an EZ 1 amp DCC decoder in a 25757 On30 Climax. The Climax occasionally lurches a few inches whenever my new 28901 4-6-0 w/DCC sound runs on a nearby siding. I am using a Bachmann 44902 controller. The address of the Climax is #6 and the 4-6-0 is #3. (No problem with a 25657 Shay using the same model decoder at address #1)

Any thoughts?

Thanks

Title: Re: DCC Locomotve Lurches
Post by: NarrowMinded on January 30, 2011, 12:24:33 AM

Try setting the decoder cv29 to dcc operation only.

NM

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: WRC on January 29, 2011, 04:08:23 PM