Print Page - E-Z Mate DCC Decoder

Title: E-Z Mate DCC Decoder
Post by: cadman1 on April 27, 2011, 12:43:44 AM

I have a couple of E-Z Mate decoders and used one in an older Athearn F7. Just needed a simple motor/lights fuction but need to know what values CV2 accepts as the loco starts slow unless I bump the MRC throttle to a minimum of 12 of 28 steps. I have returned CV3 to 1 so that should not be interfering with the normal start.
Thanks to anyone with an answer

Title: Re: E-Z Mate DCC Decoder
Post by: ACY on April 27, 2011, 01:07:01 AM

CV 2 (starting voltage) is set at 10 and can go from, 0-31. CVs 3 & 4 Accel & Decell Momentum are set at 1 and go from 1-255.

Title: Re: E-Z Mate DCC Decoder
Post by: Jim Banner on April 27, 2011, 01:41:21 AM

The full specifications can be found at the link below:

http://www.bachmanntrains.com/home-usa/ez_content/1_Amp_Decoder_Instr.pdf (http://www.bachmanntrains.com/home-usa/ez_content/1_Amp_Decoder_Instr.pdf)

Jim

Title: Re: E-Z Mate DCC Decoder
Post by: Len on April 28, 2011, 12:35:02 PM

The product description pages don't specify how many functions the EZ decoders have. Are they all 2-function like the one in the link above??

Len

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: cadman1 on April 27, 2011, 12:43:44 AM