Bachmann Online Forum

Discussion Boards => N => Topic started by: Spans the World on May 27, 2012, 05:07:58 PM

Title: MTL Couplers for Spectrum Dash 8-40CW ?
Post by: Spans the World on May 27, 2012, 05:07:58 PM
Which Micro-trains coupler conversion is recommended for the Spectrum N Dash 8-40CW ? This is the latest version with the full face pilot /plow and body mounted Rapido coupler.
Thank you
Title: Re: MTL Couplers for Spectrum Dash 8-40CW ?
Post by: railtwister on May 27, 2012, 09:28:05 PM
The Micro-Trains Coupler Conversion data sheet for Bachmann locos lists conversion kit #2004 (001 02 052)-1, with the footnote that "you'll need to file some of the coupler pocket to allow the draft gear box to fit." The page also lists the loco as a Dash 8-49C/CW. Walthers lists MTL item 1164 Body Mount Conversion (sku#489-133040) as the correct kit to fit the Spectrum Dash8-40C, no mention of the CW. Perhaps you should send an email to MTL, including the sku number of your loco to verify if you have any doubts, since Bachmann has been known to make upgrades to their locos without obvious changes to their external appearance.

Bill in FL


Title: Re: MTL Couplers for Spectrum Dash 8-40CW ?
Post by: James in FL on May 28, 2012, 12:58:55 AM
I used MT 1168

Good luck
Title: Re: MTL Couplers for Spectrum Dash 8-40CW ?
Post by: Spans the World on May 29, 2012, 08:40:08 AM
Thank you for your assistance . I finally used the 2004 on the rear pilot and the 2001 on the front pilot . Perfect match  ;D