Bachmann Online Forum

Discussion Boards => Large => Topic started by: mikeC on June 25, 2012, 09:03:17 PM

Title: Buildings for 'G' Scale
Post by: mikeC on June 25, 2012, 09:03:17 PM
When is Bachmann going to produce Large or 'G' Scale buildings?
Title: Re: Buildings for 'G' Scale
Post by: the Bach-man on June 25, 2012, 11:24:46 PM
Dear Mike,
There are no plans to do so.
sorry!
the Bach-man
Title: Re: Buildings for 'G' Scale
Post by: tac on June 26, 2012, 10:09:00 AM
Quote from: mikeC on June 25, 2012, 09:03:17 PM
When is Bachmann going to produce Large or 'G' Scale buildings?

The advertisement pages of Garden Railways are full of large-scale buildings of ALL kinds.

tac
Ottawa Valley GRS [ovgrs.org]
Title: Re: Buildings for 'G' Scale
Post by: mikeC on June 28, 2012, 05:32:05 PM
Mr. Bach Man:
    Sorry to hear that there are NO PLANS to produce 'G' Scale  buildings./ Also,.....I have another question:  Will Bachmann's 2 truck Shay operate on a 5 foot circle of track without the drive shafts coming apart?
Many thanks for your time ,
Mike C
Title: Re: Buildings for 'G' Scale
Post by: the Bach-man on June 28, 2012, 10:27:42 PM
Dear Mike,
I believe an eight foot circle is the minimum.
the Bach-man
Title: Re: Buildings for 'G' Scale
Post by: Dave on June 29, 2012, 04:18:43 AM
Mike, I have some 6ft Diameter curves on my Logging loop and the Shay has no problem with the Drive shafts. I even got it to sneak thru a 4ft Turnout but it may have been more good luck, than good management.

        Dave
          New Zealand
Title: Re: Buildings for 'G' Scale
Post by: tac on June 29, 2012, 05:28:40 AM
How well your Shay performs on such tight radii is dependent on whether the engine side is inside the curve or outside.

In either case, running on such tight curves will exaggerate wear and tear on what are in reality quite fragile moving parts, and accelerate their failure.

Sure it will run, but it won't be happy.

Your call.

tac
Ottawa Valley GRS
www.ovgrs.org   
Title: Re: Buildings for 'G' Scale
Post by: charon on June 29, 2012, 06:55:43 AM
I have been running both the original 35ton shays and the later 38ton shays on 5' diameter track for years with no problems.  They also run fine on the 4' diameter as long as you run them with the gears on the outside of the radius.
Chuck