Bachmann Message Board

Discussion Boards => General Discussion => Topic started by: joestrick on February 10, 2007, 08:34:39 AM



Title: dcc with sound
Post by: joestrick on February 10, 2007, 08:34:39 AM
on my spectrum quick start guide, it lists over 17 sound functions, as bought functions 1-9 (0-8) are allocated, can i change these to other available sounds, by using the ez command centre?


Title: Re: dcc with sound
Post by: Jim Banner on February 10, 2007, 04:09:25 PM
No.  For that you would need a more complicated, full function DCC command station.


Title: Re: dcc with sound
Post by: Hoople on February 11, 2007, 01:24:13 PM
on my spectrum quick start guide, it lists over 17 sound functions, as bought functions 1-9 (0-8) are allocated, can i change these to other available sounds, by using the ez command centre?
E-Z command is too basic to prgram CVs.
Get a Digitrax Zephyr or a NCE Power Cab.
Then you can prgram the Tsunami to have its features.
You're missing out on a LOTto not program CVs, espacially on the Tsunami.


Title: Re: dcc with sound
Post by: James Thomas on February 11, 2007, 05:11:13 PM
As I mentioned in a previous thread, the Precision Craft Models DCMaster control box will program CV's.  (I've used it to program Tsunami decoders.)It works very simply, and only costs less than $50.