Text only | Text with Images

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: RonGP7 on February 15, 2013, 02:27:28 PM

Title: How to install a dcc decoder into a 1989 mantua 4-6-2 Ho scale
Post by: RonGP7 on February 15, 2013, 02:27:28 PM
Hi anyone know how to do this step by step. I have done athearn blue box diesels but this one not sure of. I opened it up and I only see 2 wires  one going to the tender where it hooks up to the loco and one to the front lite. and they are black also tender frame and loco are metal. And no back lite and one side of tender wheels look to be metal and that's the right side. Thanks for any help Ron
Title: Re: How to install a dcc decoder into a 1989 mantua 4-6-2 Ho scale
Post by: Nathan on February 15, 2013, 05:24:08 PM
A better place to ask this question would be one of the DCC forums or one of the DCC retailers forums that does installations.

Try Tony's forum at:

http://tonystrains.com/forum/

Nathan
Title: Re: How to install a dcc decoder into a 1989 mantua 4-6-2 Ho scale
Post by: Bucksco on February 15, 2013, 07:15:05 PM
Thanks Nathan!
Title: Re: How to install a dcc decoder into a 1989 mantua 4-6-2 Ho scale
Post by: richg on February 16, 2013, 02:56:24 PM
The DCC Model Railroader forum is another good place to ask. Many users there. Some have done this loco.

http://cs.trains.com/mrr/f/744.aspx

Rich
Text only | Text with Images