Text only | Text with Images

Bachmann Online Forum

Discussion Boards => Large => Topic started by: bobdvt on March 30, 2013, 05:50:17 PM

Title: What battery to use for the C 19 to have a battery powered loco?
Post by: bobdvt on March 30, 2013, 05:50:17 PM
A friend wants to run his C 19 with battery power.  What battery should he use, that will fit in the C 19 Tender?
Title: Re: What battery to use for the C 19 to have a battery powered loco?
Post by: edmc on March 30, 2013, 08:51:30 PM
I use this battery and charger in my C-19. Also use it in my Anne 4-6-0 and Aristo RS3s. The battery will slip down into the front area of tender.

http://www.all-battery.com/li-ion18650148v2200mahrechargeablebatterypackwithpcbprotection.aspx

Will you be using a revolution receiver..?
Good Luck, Ed McConnell
Title: Re: What battery to use for the C 19 to have a battery powered loco?
Post by: edmc on March 30, 2013, 08:56:44 PM
I gave you the wrong battery for the RS3..this one and they both use the same charger..
http://www.all-battery.com/li-ion18650148v2600mahrechargeablebatterypackpcbprotection31098.aspx
I know, Bachmann does not make the Rs3, just passing along some info..Ed
Title: Re: What battery to use for the C 19 to have a battery powered loco?
Post by: bobdvt on March 30, 2013, 11:25:21 PM
 :) Thanks very much Ed.  That was also what I thought...a slimmer battery than the 4 or 5 amp size.    Bob 
Text only | Text with Images