Bachmann Online Forum

Discussion Boards => Large => Topic started by: bilumbo on June 16, 2013, 03:28:03 PM

Title: anniversary 4-6-0 operating voltage and what is the part number of the speed con
Post by: bilumbo on June 16, 2013, 03:28:03 PM
 I have just acquired an anniversary 4-6-0
It hasn't any instructions with it, so I need know the operating voltage, also the part number of the speed controller.
Also is it suitable for radio control
Title: Re: anniversary 4-6-0 operating voltage and what is the part number of the speed con
Post by: Chuck N on June 16, 2013, 05:44:45 PM
There are many controllers available on the market.  You need one that yields 0-22 v DC.  Depending on how many cars are you going to pull, adding lights, smoke, etc.?  That will start to dictate the amps you will need.  I would recommend a minimum of 5 amps.  If you want to expand your empire with more and larger engines go with 10 amps.

Chuck

Edit,  try to avoid a starter set power supply.  They will operate the train in the set, as is, but not much more.  Their output is usually less than 1 amp.  No power for expansion.  Buy once not twice.