Bachmann Message Board

Discussion Boards => General Discussion => Topic started by: John Honeck Sr on June 22, 2013, 02:08:44 PM



Title: wiring turnouts
Post by: John Honeck Sr on June 22, 2013, 02:08:44 PM
I went to a clinic on wiring, one of the things that told us was to put in a jumper from each of the tracks to the moveable track. This was so if the moveable section gets dirty you have power problems with your trains. My questions can this be done with the Buchmann turnouts? I looked at one of mine, it doesn't look possable or easy. Any suggestions?


Title: Re: wiring turnouts
Post by: Doneldon on June 22, 2013, 03:30:50 PM
John-

Use the green jumper on the bottom of your turnout to power
the frog. The moving rails are already powered.
                                                                          -- D