Bachmann Message Board

Discussion Boards => On30 => Topic started by: rflanagan on October 07, 2013, 08:38:03 PM



Title: Trouble with DCC board in On30 Heisler
Post by: rflanagan on October 07, 2013, 08:38:03 PM
I purchased two On30 Heisler's and the sound cards. One sound card worked perfectly and the other would not work. So I reset the decoder using the information on the Spectrum Quick Start Guide CV Settings. Using a Digitrax DCS50 Command Station I reset all the CV settings and now the engine will not work at all. Even without the sound card. Nothing no movement.

Any help please.



Title: Re: Trouble with DCC board in On30 Heisler
Post by: 2foot6 on October 07, 2013, 09:56:19 PM
Hi ,as a basic starting point ,type in loco address of "3",it is the usual default address after resetting decoders.Then see if you can progress from there .. cheers Peter.


Title: Re: Trouble with DCC board in On30 Heisler
Post by: Bucksco on October 08, 2013, 02:10:16 PM
http://www.bachmanntrains.com/home-usa/board/index.php/topic,19982.0.html


Title: Re: Trouble with DCC board in On30 Heisler
Post by: rflanagan on October 08, 2013, 07:10:06 PM
Thank you very much.
Some times you can't see the forest because of the trees.
Everything is working perfect and I got the directional lights working.