Text only | Text with Images

Bachmann Online Forum

Discussion Boards => Large => Topic started by: lrparks on September 14, 2007, 12:50:13 PM

Title: Brass track
Post by: lrparks on September 14, 2007, 12:50:13 PM
I only need 3 pieces of 120" diameter curve and 4 pieces of 24" straight code 332 brass track to finish my layout. I currently have USA track. Any suggestions on a place I can buy by the piece other than wholesaletrains.com? The straights are on back order.
Title: Re: Brass track
Post by: Mark Oles on September 14, 2007, 01:28:39 PM
There are tons of places you can order track from.

Ridge Road Station
St. Aubins
Trainworld
Southeast Trains

FYI, Aristocraft, USA, and LGB all make code 332 brass track.  USA and Aristo are made in the same factory, or so it would appear. 

Title: Re: Brass track
Post by: Mark Oles on September 14, 2007, 01:30:09 PM
Also,

Aristo Euro style track and USA track seem to have a similar tie spacing.  The Aristo USA-style track has much smaller ties, but all will work together.

Good luck!

Mark
Title: Re: Brass track
Post by: Engineer1876 on September 14, 2007, 05:33:29 PM
Try San Val Trains
(800)423-3281 National / (800)924-9658 California :)
Title: Re: Brass track
Post by: Paul M. on October 04, 2007, 09:42:38 PM
Of course, there's always eBay www.ebay.com
Title: Re: Brass track
Post by: altterrain on October 05, 2007, 02:31:30 AM
Ridge Road Station  (http://www.ridgeroadstation.com/trains.shtml (http://www.ridgeroadstation.com/trains.shtml)) sells Aristo track by the piece.

-Brian
Text only | Text with Images