Discussion Boards => N => Topic started by: Lackawanna Consortium on February 27, 2014, 05:42:42 PM
Title: Unballasting Track
Post by: Lackawanna Consortium on February 27, 2014, 05:42:42 PM
What is the best way to unballast a section of track that I want to reconfigure without damaging the track sections. I used Elmers glue with a 50/ 50 mix with water. Thanks Paul
Title: Re: Unballasting Track
Post by: Mike C on February 27, 2014, 10:14:23 PM
Lay some wet towels over it to loosen the glue....Mike