Hello everybody !
First problem :
I am a the very happy owner of six B'mann 2-8-0 but one of them doesn't run. I just have the lights.
In fact, it runs fine if I connect it whith the tender of an other consolidation. I didn't notice something wrong in the tender...
Second problem :
I found on eBay a tender of B'mann 4-4-0. I wanted to modify it to connect it to the 2-8-0. But this time, the loco doesn't run and no lights ! If I connect this tender to an other 2-8-0, same result !
Do I understand that we can't mix locos and tenders in the same B'mann range ?
Can someone help me ?
Best regards from France !
EastbrookBridge
Re the faulty tender check the decoder is OK swap the decoder from a tender which you know works OK or fit a decoder blanking plug.
Did you but the loco with the faulty tender NEW? if so you may wish to return it to the seller for replacement.
Steve ---Wales UK
The Ebay tender from the 4-4-0 may possible have wiring or decoder faults, check it actuall has a decoder in it and if it does swap it for one you know works OK.