Print Page - How To??

Title: How To??
Post by: Hobojim on October 16, 2007, 03:17:51 PM

Hello I am new to this board and also new to eztrack i got a set left and right switched but no instuctions on how to hook them to power?? do they go on the AC? or the DC like the track.. sorry if this is dumb question... thanks all for help

Title: Re: How To??
Post by: ebtnut on October 16, 2007, 03:25:57 PM

Hook the track up to the controlled DC. AC will fry your locos real quick.

Title: Re: How To??
Post by: Hobojim on October 16, 2007, 06:04:53 PM

Hi noo i do not mean the track to power the engines i mean to power the switches?? AC or DC???

Title: Re: How To??
Post by: ta152h0 on October 16, 2007, 06:15:05 PM

So Iget to answer you. Switches are AC. remember it is a momentary contact system.

Title: Re: How To??
Post by: Hobojim on October 16, 2007, 06:56:17 PM

Thanks much...

Title: Re: How To??
Post by: Jonathan MacCormack on October 16, 2007, 08:42:38 PM

Red wire to power supply, plug into switch controller (black box), green wire from switch to controller box.

Connection points are obvious.

J

Bachmann Online Forum

Discussion Boards => HO => Topic started by: Hobojim on October 16, 2007, 03:17:51 PM