Bachmann Online Forum

Discussion Boards => HO => Topic started by: JimJim on November 14, 2014, 02:40:48 PM

Title: Difference between Bachmann Decoders #44915 & #44913?
Post by: JimJim on November 14, 2014, 02:40:48 PM
Hello All,
Can anyone tell me the difference between the Bachmann #44915 versus the #44913 decoder?
They both have wiring harnesses as opposed to the 8-pin plug found on other decoders. They also both came in three packs labeled #44914.
Looking at the instruction sheets that came with them they seem identical.
Any help would be greatly appreciated.
Title: Re: Difference between Bachmann Decoders #44915 & #44913?
Post by: Hunt on November 14, 2014, 03:45:53 PM
They are same basic 1 amp decoder. Wiring harness type is the difference.
# 44913 has wire harness bare end. Packaged 1 per card
# 44915 has wire harness with NMRA 8-pin plug. Packaged 1 per card

# 44914 has wire harness bare end. Packaged 3 per card
# 44916 has wire harness with NMRA 8-pin plug. Packaged 3 per card

Info and image can be found in the Bachmann Online store.
Title: Re: Difference between Bachmann Decoders #44915 & #44913?
Post by: JimJim on November 14, 2014, 04:41:57 PM
Thank you for the clarification. Basically the same decoders.
I was hoping that one of them had a "secret" function like flight or a proximity stop function (anti-crash).
Thank you again.