I have lost the red cable that goes to the track, and of course we lost the track connector as wewll. To make it work for Christmas I plan to build a cable and some alligator clips on the track. But I need a diagram or a simple explanation. Don't want to get the wires crossed!!
Radioshack should have what appears to be a 1/8" plug.
One wire from the power supply (+) post to one rail and the second wire from the (-) post to the other rail. Make sure it is DC goint to the track.
Chuck
I figured it was that simple.
Dear Eric:
3.5mm (1/8") stereo (TRS) plug:
Tip (NOT USED large scale) = HO/N/On30 AC out (to power E-Z Command)
Ring = Track Variable DC out
Shank = Common (AC return and Variable DC return)
In other words, wire the ring to one rail, and the shank to the other rail.
Hope this helps.
Sincerely,
Joe Satnik