Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: Vizzin72 on November 19, 2015, 12:29:51 PM

Title: Screw in dynamis power out
Post by: Vizzin72 on November 19, 2015, 12:29:51 PM
I have Bachmann dynamis with an ho EZ track layout.  I want to run two more terminal rerailers to add power to the existing single rerailer.  I have read previous posts about splicing wires from one rerailer to the next etc etc .... My question is .... Instead or splicing wires, can I just run my 10 foot extensions back to the control and plug multiple sets of wires in to the optional screw in adapter at the power to track out (obviously not the 3.5 mm outlet )

Thanks
Title: Re: Screw in dynamis power out
Post by: Hunt on November 19, 2015, 04:58:21 PM
Do not try to fit multiple wires into each side of the Dynamis included plug with screw terminal connector.

Connect leads from the Dynamis plug with screw terminal connector to either a Dual Row Terminal or  Block Euro Style Nylon Barrier Strip (or the like). From that, connect the leads to the terminal rerailers or solder them to track.
Title: Re: Screw in dynamis power out
Post by: Vizzin72 on November 19, 2015, 05:29:27 PM
Dual row terminal ? Like something from radio shack ?