Text only | Text with Images

Bachmann Online Forum

Discussion Boards => HO => Topic started by: filmtrain on November 15, 2007, 10:15:35 PM

Title: reverse loop
Post by: filmtrain on November 15, 2007, 10:15:35 PM
I need to know how to do a reverse loop using Bachmann easy track.  All the help I have gotten has been for wiring standard track.  Any help here?  Please!
Title: Re: reverse loop
Post by: Jonathan MacCormack on November 15, 2007, 10:28:35 PM
Check 2007 catalog, page 31, item 44912....exactly what you need

j
Title: Re: reverse loop
Post by: ta152h0 on November 15, 2007, 10:43:24 PM
I used a DREMEL saw to cut the track and filled the void with melted plastic molded to the track profile. And drilled holes in the track to solder the required wires.
Title: Re: reverse loop
Post by: Jonathan MacCormack on November 16, 2007, 09:08:10 PM
filmtrain,

Is the module I suggested above what you're looking for?

J
Title: Re: reverse loop
Post by: filmtrain on November 17, 2007, 10:41:18 PM
That item looks like it will do the trick, I assume that since it says EZ command that it will work with DCC.

Thanks for the help.
Text only | Text with Images