Bachmann Online Forum

Discussion Boards => Large => Topic started by: mudhen on March 08, 2016, 06:49:38 PM

Title: C-19 Battery operation
Post by: mudhen on March 08, 2016, 06:49:38 PM
Has anyone had any luck installing the Revolution, and Phoenix sound to a C-19.
My biggest concern is getting a 14,8 volt battery to fit in the tender, not having
to revert to using a battery car.
Any helpful thoughts
Thanks in advance.
Title: Re: C-19 Battery operation
Post by: edmc on March 08, 2016, 07:35:30 PM
I use a flat 4 cell 14v pack and it sits in the front end, revo and p8 sound fit also.. if you want some pictures send me your email. ed
emcconnell@rochester.rr.com
Title: Re: C-19 Battery operation
Post by: Kevin Strong on March 10, 2016, 01:20:44 AM
Likewise, no trouble here, either. Revo in the socket, Phoenix taped off to the side. Everything else stock. Know, however, that you're going to have to jumper the power from the battery + and - to the + and ground pads to get power forward to the locomotive for lights, etc. The Revolution does not make this connection.

Later,

K