Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: Tyler on April 05, 2016, 05:45:08 PM

Title: Steam effects
Post by: Tyler on April 05, 2016, 05:45:08 PM
Hey if I were to use a small fog machine to make realistic steam effects on my steam enignes would I have to do anything before I run it the locomotive again or will it be fine just letting it roll out like that?
  ???
Title: Re: Steam effects
Post by: Trainman203 on April 14, 2016, 05:25:54 PM
Like smoke, the physics of condensing steam can't be scaled down to look realistic on small scale models.  

I did once run an 18" gauge (if I remember right)  live steamer, and at that size the real steam looked great.  The pop valves, the cylinder cocks, the whistle, the whole thing was the height of cool.  The injector overflows dripped water and you fired it with real coal with a miniature shovel.

That engine was really pretty big. . You sat on the tender and looked over the cab roof , and hauled a 6 or 7 car train full of kids,  it was one of the most fun things I've ever done.
Title: Re: Steam effects
Post by: James in FL on April 14, 2016, 06:50:59 PM
By default, the moderator(s) of this forum will be watching this thread, simply because of the topic title having anything to do with smoke. Don't get your feelings hurt if it get deleted.
Model in the way you wish... your way, is the right way, regardless of others opinions.

Now,
Are you running DC or DCC?
Have you a link to that
Quotesmall fog machine to make realistic steam effects
?
Is the "steam" water vapor?
I'd like to review the specifications of this
Quotesmall fog machine
, specifically, the max voltage and current draw and the physical size.
Can you post that?

Not sure I understand the rest of your question. :-\
Quotewould I have to do anything before I run it the locomotive again or will it be fine just letting it roll out like that?
???

Once it's wired properly, it would be a matter of a toggle, to turn it on or off, I wouldn't think it would require anything more.
Again, not sure I understand your question.
Title: Re: Steam effects
Post by: Tyler on April 15, 2016, 04:15:31 PM
Ok 1 I running with DCC
And 2 wht I meant was I would put a small fog machine beside the steam engine and let it run to make it look like it was really smoking like the real thing.
And 3 when I let steam engine pull out again will the water vapor mess up the train or will it run without a problem?

THATS WHAT I MEANT😈
Title: Re: Steam effects
Post by: AGSB on April 15, 2016, 04:34:16 PM
Personally, I would be concerned with condensation.
Title: Re: Steam effects
Post by: James in FL on April 15, 2016, 10:09:14 PM
The water vapor will accelerate the oxidation process both inside your lokie and on your track.
I would not recommend parking any loco next to a fog machine.
Condensation anywhere on the layout is not a good thing.