Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: ejseider on April 29, 2017, 07:07:38 PM

Title: Mantua 0-6-0T, DCC
Post by: ejseider on April 29, 2017, 07:07:38 PM
I've got a Mantua 0-6-0T DCC equipped, which has stopped working.  On the program track it reads all of its CVs with no problem, it also runs OK on a DC track (runs forward & reverse with headlamp).  However it does not respond to any commands on the DCC track, won't even turn on the head light.  I've reset it to the factory defaults, but get the same results.  Any thoughts as to what may be wrong and how to fix it?
Title: Re: Mantua 0-6-0T, DCC
Post by: RAM on April 29, 2017, 07:54:34 PM
Do other dcc locos run ok?
Title: Re: Mantua 0-6-0T, DCC
Post by: ACY on April 30, 2017, 12:19:28 PM
What DCC system are you using?
Title: Re: Mantua 0-6-0T, DCC
Post by: ejseider on April 30, 2017, 03:50:45 PM
Yes, my other DCC locos are running OK.  I'm using a Digitrax DCS 51
Title: Re: Mantua 0-6-0T, DCC
Post by: ACY on April 30, 2017, 04:39:49 PM
Can you try an MRC system since it has a MRC decoder it could be a compatibility issue with your system.
Title: Re: Mantua 0-6-0T, DCC
Post by: ejseider on April 30, 2017, 05:09:28 PM
Don't have access to MRC.  It was running fine until about 2 weeks ago on the Digitrax system
Title: Re: Mantua 0-6-0T, DCC
Post by: ACY on April 30, 2017, 05:13:36 PM
Try messing with the CV to disable/enable analog/digital.