Bachmann Message Board

Discussion Boards => General Discussion => Topic started by: GFV on November 10, 2017, 07:52:52 PM

Title: DCC Turnouts
Post by: GFV on November 10, 2017, 07:52:52 PM
Would it be possible to purchase just the decoders that come installed in the DCC Turnouts (left or right) so that I can convert my older remote turnouts to DCC.

Title: Re: DCC Turnouts
Post by: Len on November 11, 2017, 01:19:52 AM
If they are not available from Bachmann, I would suggest using either the Digitrax DS52 or DS64 stationary decoders.

The DS52 controls 1 or 2 turnouts:

The DS64 controls up to 4 turnouts:

Both can control either dual solanoid switch motors, or slow motion type switch motors. If you have both types on your layout, you'll need a seperate decoder to each type.