Hi everyone. I am hoping someone can offer a solution.
I have a few 4-6-2 Light Pacific's and Baldwin 2-6-0's with sound value on board. Is there anyway I can disable the decoder's from starting up and making sound as soon as track power is applied? I have searched and have not been able to find a way to do this so I am asking as a last ditch effort.
I like to have the locos on the layout quiet until I choose to start them and it's a pain having to go around and shut down locos. (I'm lazy. Lol)
Can you isolate a siding with its own on/off switch? Or if it's DCC you can mute the sound with, if I remember, button #8, the mute button on the DCC command center. What do you use? I use the Digitrax Evolution. There's a button on there for that. I don't use it, I isolate a siding. :D
Hi plint.
I use a Digitrax system as well and am hoping to get away from having to mute each one every time I turn track power on. I don't want to have to isolate any track if possible. All my other loco's can be programmed to remain silent when track power is turned on, until I start them. I'm hoping I can get these loco's to do thus as well.
Sound on when track power is applied is the default for the factory installed decoder and it cannot be changed. Replace the decoder with one that has the features you want.
Dang. That's kind of what I was expecting to hear. Thanks Hunt.
:(
Quote from: 686 Shooter on March 17, 2021, 03:52:05 PM
Hi plint.
I use a Digitrax system as well and am hoping to get away from having to mute each one every time I turn track power on. I don't want to have to isolate any track if possible. All my other loco's can be programmed to remain silent when track power is turned on, until I start them. I'm hoping I can get these loco's to do thus as well.
I have about 3 runaround tracks with on/off switches which I'll use if I want to keep the sound off. I just put the trains in there and shut them off with the toggles. It's kinda like staging tracks in a sense where I park the trains I'm not running at that moment.
Use e stop to shut it down if your dcc system can be programmed to do that. It will go silent. I think that is how I did it. You can still blow the horn and ring the bell ,but no prime mover until you throttle it up .Maybe set cv 116 between 193 and higher.
Eddy