What kind of coupler is available for the Bachmann Big Hauler front dummy coupler so that I can double head?
Hi,
Years ago I posted some articles on how I did it. It is very straight forward but does require a bit of cutting and filling.
Here are some links to those articles.
https://www.bachmanntrains.com/home-usa/board/index.php/topic,15947.msg129764.html#msg129764
https://www.bachmanntrains.com/home-usa/board/index.php/topic,23753.msg188258.html#msg188258
This link is the photos which went with the original article which might be easier to see.
https://www.dropbox.com/sh/kfzg3ingpjld0cs/AAAVrBBCN4YXVkgXNiQ73YW3a?dl=0
I loved doublheading and always doubleheaded my 4 coach passenger train and many freights as well. I posted a video of two of my 4-6-0 going thru an Aristo Wide Radius crossover to test how it worked. I always went much slower when operating.
https://www.youtube.com/watch?v=DaKoGZwCPpc
Someone said this will work with R1 tighter switches but I will not guarantee it. There must be better ways to do it, but this worked for me. I have never liked how far out they extended tho.
Hope this gives you some idea how to do it.
Forgot to mention I used the low cost Harbor Freight two part epoxy and after all these years it is holding up fine.