Print Page - Command Plus CV Setting Capabilities

Title: Command Plus CV Setting Capabilities
Post by: Alastair on August 19, 2023, 01:45:45 PM

Can Bachmann's Command Plus be used to set CVs? If so how? There's no guidance on the internet or YouTube.

Title: Re: Command Plus CV Setting Capabilities
Post by: Yard Master on August 21, 2023, 08:55:53 AM

Hi Alastair,

The E-Z Command Plus cannot be used to set CVs in most instances.

Models with a TCS decoder with Audio Assist technology are designed to change decoder settings using just the address/function buttons 0-9 on DCC systems such as the E-Z Command Plus. Direct modification of CVs otherwise requires another manufacturer's DCC system or a software utility.

Title: Re: Command Plus CV Setting Capabilities
Post by: Terry Toenges on August 21, 2023, 11:00:14 AM

I use E-Z Command to run my layout.
I bought a Digitrax PR4 to program the addresses and CV's on a separate piece of track.
https://www.digitrax.com/products/computer-control/pr4/ (https://www.digitrax.com/products/computer-control/pr4/)

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: Alastair on August 19, 2023, 01:45:45 PM