Text only | Text with Images

Bachmann Online Forum

Discussion Boards => HO => Topic started by: SteamGene on February 21, 2007, 10:35:20 AM

Title: track radius
Post by: SteamGene on February 21, 2007, 10:35:20 AM
I know I should know this and I could measure it myself, but is track radius taken from the inside raid, the outside rail, or the center line?
Gene
Title: Re: track radius
Post by: Guilford Guy on February 21, 2007, 10:39:25 AM
I believe center line.
Title: Re: track radius
Post by: SteamGene on February 21, 2007, 03:28:10 PM
It's the "I believe" that is the sticker.  ;D
Gene
Title: Re: track radius
Post by: Atlantic Central on February 21, 2007, 04:06:35 PM
Gene,

Centerline, no question about it!

Sheldon
Title: Re: track radius
Post by: Bill Baker on February 21, 2007, 04:17:57 PM
I agree, center line.
Title: Re: track radius
Post by: ben_not_benny on February 21, 2007, 04:21:31 PM
I usually measure the inside and outside rails, add them up and divide by two. Centerline is correct.
Title: Re: track radius
Post by: SteamGene on February 21, 2007, 05:19:37 PM
Ben,
I assume ypu count sheep by counting the legs and dividing by four, right?  :D
Center line was what I thought.  But I really needed to make sure.  Thanks, guys.   BTW, Sheldon, that means some straight track has been laid.
Gene
Text only | Text with Images