Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: T-95 on May 09, 2008, 12:33:42 PM

Title: PC Boards and Toby
Post by: T-95 on May 09, 2008, 12:33:42 PM
Whats up everybody?

Just wondering if anybody knows how to disassemble  Toby the Tram engine to get to the PC board. The TCS website helped with Henry but I am puzzled. Im switching to DCC. Also the PC boards are marked with a P- and P+, which is the left or right pickup?

PS Iwill post this in the Thomas thread later. 

Thanks a bunch!
Title: Re: PC Boards and Toby
Post by: hobo1 on May 09, 2008, 09:29:52 PM
go to bachmann product reference for diagrams of toby under standard line
Title: Re: PC Boards and Toby
Post by: T-95 on May 09, 2008, 10:55:42 PM
lm bad at deciphering    Exploded parts diagrams.  :-\
Title: Re: PC Boards and Toby
Post by: hobo1 on May 10, 2008, 12:43:02 PM
remove the shell and the pc board should be on top, 2 wires to motor and 4 wires to the trucks
Title: Re: PC Boards and Toby
Post by: T-95 on May 10, 2008, 04:57:34 PM
Yes, but HOW do i get the shell off?
Title: Re: PC Boards and Toby
Post by: hobo1 on May 10, 2008, 05:54:49 PM
remove the coupler pocket screws