Print Page - Hayes Bumpers Product Code: 44591

Title: Hayes Bumpers Product Code: 44591
Post by: aamuller@nycap.rr.com on February 18, 2009, 09:08:30 AM

Does Bachmann make a Hayes Bumpers Product Code: 44591 that has a Power Terminal in the back end.

This would help wiring yards so that power can be removed while not in use.

Al

Title: Re: Hayes Bumpers Product Code: 44591
Post by: THB-DAVE on February 18, 2009, 09:17:12 AM

Use Terminal track clips and place them anywhere in the siding with a SPST
switch and you can turnoff the power. Available at all Model train shops for 2 bucks. All you need is one clip per siding and one insulated joiner.

Dave

Title: Re: Hayes Bumpers Product Code: 44591
Post by: jayl1 on February 18, 2009, 10:13:47 AM

Atlas makes a terminal rail joiner - a rail joiner with a piece of wire already soldered on.

Title: Re: Hayes Bumpers Product Code: 44591
Post by: aamuller@nycap.rr.com on February 19, 2009, 01:05:17 PM

Thanks

Al

Title: Re: Hayes Bumpers Product Code: 44591
Post by: grumpy on February 19, 2009, 11:29:54 PM

There is usually enough rail projecting past the bumper that no connector is neede . Just solder to the end of the rails.
Don

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: aamuller@nycap.rr.com on February 18, 2009, 09:08:30 AM