Print Page - need a schematic of the Bachmann EZ command unit

Title: need a schematic of the Bachmann EZ command unit
Post by: abe on June 29, 2009, 06:22:09 PM

Hi,
Does anybody know where I can get a schematic of what is inside the Bachmann EZ command unit?
I would appreciate it.
Thanks,
Abe

Title: Re: need a schematic of the Bachmann EZ command unit
Post by: Yampa Bob on July 02, 2009, 02:00:52 AM

Hi Abe,
Here is a partial schematic drawn by Jim Banner.

http://members.shaw.ca/sask.rail/dcc/EZcommand/index.html

Caution: If you remove the circuit board and happen to turn the unit over, all the buttons will fall out. :o

Title: Re: need a schematic of the Bachmann EZ command unit
Post by: pdlethbridge on July 02, 2009, 07:03:53 AM

Are you talking from experience? ;D

Title: Re: need a schematic of the Bachmann EZ command unit
Post by: abe on July 02, 2009, 07:58:00 AM

Hi,
Yes I also found That page from Jim Banner and I did the same as you. All the buttons fell out but I managed to find what I wanted to know.
I wanted to find a way to control the EZ Command unit instead of with the control knob, with a computer. I am building a little micro processor circuit that can now connect the EZ command with my PC
If I am successfull I will see if anybody is interested.
Thanks,
Abe

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: abe on June 29, 2009, 06:22:09 PM