I have a Spectrum SD-45 (Decoder removed and jumpers set in for straight DC operations).
Neither headlight LED will burn. I have connected them to the spots marked LED 1 and LED 3. But neiter these nor the LED 2 connection is under power when I hold my voltmeter to them. Is there anything I overlooked when removing the DCC unit?
Peter

I have a spectrum HO SD-45 on which I have removed the DCC decoder to run the loco on straight DC.
Now the headlights do not burn anymore. Do I need to change some wires for the LED's?

Thank Bob
Peter

I tried to lift the hood off the frame, but it would not budge. Any trick?
I seem to need to lift it off if I want to install the headlight.
Peter