Topics - Bucksco

The following is from the Digitrax website:

There are decoders now present in the market that do not draw enough current for the programming track to reliably detect that they are present, hence the error report of "d-nd". All you have to do is to use a 1K 0hm 1/4 watt resistor across Prog A and Prog B outputs during the program process and it will program the Lenz/Atlas decoders. Some of the new Digitrax decoders also require this same approach.

"d nd" is the error code for decoder not detected. This problem can also arise if the locomotive has dirty wheels or the programming track is dirty, with the dirt interfering with current flow.

#248

General Discussion / MOVED: Spectrum EMC Gas Electric Doodlebug Powered

March 03, 2012, 11:09:19 AM

This topic has been moved to N.

http://www.bachmanntrains.com/home-usa/board/index.php?topic=19969.0

#249

Large / MOVED: How to replace the Axle Drive gear on your Bachamnn Spectrum 4-4-0 or 2-6-0.

February 25, 2012, 09:29:37 PM

This topic has been moved to Large Scale.

http://www.bachmanntrains.com/home-usa/board/index.php?topic=19904.0

#250

General Discussion / MOVED: Updating the older models in the Thomas range

February 22, 2012, 07:29:45 PM

This topic has been moved to Thomas & Friends.

http://www.bachmanntrains.com/home-usa/board/index.php?topic=19875.0

#251

General Discussion / MOVED: n-scale Spectrum 2-10-2 DCC operation

February 15, 2012, 08:36:46 AM

This topic has been moved to N.

http://www.bachmanntrains.com/home-usa/board/index.php?topic=19774.0

#252

General Discussion / MOVED: dating williams rolling stock

February 13, 2012, 01:28:38 PM

This topic has been moved to Williams by Bachmann.

http://www.bachmanntrains.com/home-usa/board/index.php?topic=19751.0

#253

General Discussion / MOVED: n gauge switches

February 08, 2012, 08:01:03 PM

This topic has been moved to N.

http://www.bachmanntrains.com/home-usa/board/index.php?topic=19698.0

#254

General Discussion / MOVED: 1:20.3 Scale Narrow Guage 2-6-0 Mogul Steam Loco Problem

February 08, 2012, 08:40:28 AM

This topic has been moved to Large.

http://www.bachmanntrains.com/home-usa/board/index.php?topic=19563.0

#255

General Discussion / MOVED: G scale K27 and sound decoder question

January 25, 2012, 08:56:17 PM

This topic has been moved to Large.

http://www.bachmanntrains.com/home-usa/board/index.php?topic=19518.0

#256

General Discussion / Beginner questions

December 23, 2011, 08:20:31 PM

'Tis the season and there are a lot of beginner questions popping up on the forum. All of the advice being provided by the "usual suspects"

is greatly appreciated but we all need to keep in mind that everyone was once a novice and needed some "friendly" advice. To that end we ask that no matter how basic we might feel that a question is everyone needs to be friendly and keep a civil tone.
Thanks!

#257