I have a Climax that I cannot get to operate.  When I power it up I only get a buzzing sound and both lights are on all the time.  No movement, whistle bell etc.  I have tried resetting CV8 without any affect at all.  Any help would be appreciated!

Kevin S.

I need screws that are the same thread configuration as the screws holding the Shay tender to the chassis but which are 1/4" longer than the screws provided.  Does anyone know the exact thread/screw size for these screws?  They are part number 10213.

Thanks!

I have a Bachmann 2-6-0 that I have worked on but it seems to have  a significant wobble in the drive train.  I can't post a video here, but I posted on a Facebook site so show the problem.  I would appreciate anyone's thoughts on what I can do to try to remedy this or if anyone has suggestions on what the problem is and how to resolve it.  Is this a quartering problem on one of the drivers?

Video is located at:  https://www.facebook.com/groups/1408058259500198/      Search for my name, Kevin Spady.

Thanks for any help!

Kevin

I have searched extensively for any information that would help me add a backup light to the Bachman On30 two truck shay, without any success.  The locomotive came with factory installed DCC and sound.  Several questions:

1.    Has anyone done this?

2.    Is it possible to add a light using the existing board?

3.    Does anyone have a circuit diagram for the Bachmann board?

4.    Anyone know what the unused C2 solder pads on the main board are for?  They do not appear to be used.

Sorry for so many questions, but seeking some guidance here.


Thanks


Kevin Spady

Hi all

I have a new 2-4-4-2 with sound that is a great little locomotive.  My only "complaint" about it is that the headlight and backup light both cooperate simultaneously and are overly bright.  Does anyone know a CV setting that will allow the two lights to operate indepenently and with directional operation?  (ie forward light on when moving forward, etc.)  Is it possible to change the intensity of the lights, or would that require wiring in a resistor into each lighting circuit?

Thanks all!

Kevin Spady

Another question related to 2-6-6-2 sound intallation.  Can the plugin sound decoder for the new 2-4-4-2 be used in the 8pin connector on the the 2-6-6-2?

Hi all

I received a 2-6-6-2 On30 articulated from a friend as a gift.  The locomotive has no sound, but is DCC and has a 21 pin board with an 8 pin socket connecting the Bachmann decoder to the board.  I would like to put sound in the locomotive.  I know I will have to install a speaker in the speaker housing, but is putting sound onboard as easy as swapping something like a Tsunami TSU-1000 for the factory decoder in the existing 8 pin connector on the PC board?

Any help here would be greatly appreciated.

Kevin   

I just bought a DCC ready Climax NIB, but an older model.  When I attempt to run it on my track it sits and "buzzes" with both headlights on.  It has no decoder.  Do I need to run it in DC mode in order to get it to work?

Mr. Bach-Man

I have 2 Bachman Climaxes and two Shays.  I am interested in obtaining the parts bags for each that include smokestacks and other detail parts.  These have bee out of stock for the past few months.  Any idea when these part will be available as I am unable to complete detailing etc on these locos until I can get the parts.

Thanks!

Hi all

I am new to the boards and a neophyte to DDC so please bear with me.  I just bought a DDC shay (no sound) and attempted to operate it using a NCE Powercab.  All my other Bachmann locos worked fine from the box.  This unit just sits on the track and hums, no lights, no movement and no control.      I tried resetting CV 8 =8 without any change.  Is the unit damaged or is there something I can do to do a factory default reset?

Thanks! Would appreciate any responses!