Older Bachmann G scale stock has the couplers at a lower height than the 1:20.3 models.
Any suggestions on either a universal solution for all my stock, to bring the 1:22 scale vehicles' couplers up to the height of the K-27's coupler, or maybe to modify one boxcar as a convertor vehicle?

I've just spent a frustrating hour trying to fit a snowplow to my K-27 #463. I removed the pilot beam and can see that there are two lugs in the under side of both the original pilot beam and the snowplow assembly - these drop neatly into holes in the cast frame spacer on the normal pilot, but try as I might, I cannot get the plow far enough back to get the lugs to go into the holes!

Can anybody out there who has fitted a plow to a K-27 offer any suggestions? I've looked at previous posts about plows but didn't find any comments on this problem.

Keith.

I need to replace the final drive plastic gear on an 0-4-0T. IT's the Coal Creek version, of the older and cheaper 0-4-0T. Can't see it amongst the listed spares on the Bachmann web site, anyone know if it is possible to obtain a spare gear?
(I'm in the UK).

Thanks
Keith.