Hey bachmann
I'm just looking for an update on the motorized turntable, when should we expect to see it. I'm planning on doing a kit bash for the Tidmoth Shed. Also is there copies of the owners manual on the website yet I want to do research on how it works with DCC and if I'll need to buy a decoder for it or could you tell me which type I should buy

Thanks

I the process of setting up my setup i'm using EZ track DCC turnouts and want to use lights to indicate the position of the switch. is there a way to use a TCS FL2 to switch the lights at the same time the turnout is switched or can anyone suggest a better way of doing it.
Also if i'm using a two signal light i assume the green light should indicate that the switch is thrown closed for the mainline and red would indicate siding or branch line corret

thanks for the help and advice

Hey Bachmann
any idea on the release date for the 2011 catalog. I'm sure there are others who are curious too. I would like to order one as soon as I can
thanks

Hey Bachann
here is an Idea for a new discussion board.  DCC
It seem to me that a lot of discussions, questions and talk on other boards could be placed under this on topic board called DCC
Maybe other members would find it usefull like I would, seeing that I'm somewhat new to DCC I find myself looking for answers and would like a friendly place to go to get help

Thanks for the consideration

John

HI Guys
I have a MRC Prodigy Avanced2. At what point should I consider putting a booster on my layout. The Layout is a shelf layout that is in my son's room I couldn't give you a real measurement of the layout cause it has differnent size areas. My locos sputter in some area. So I'm wondering the best way to messuer the out put of the track and what should be coming out

thanks for the help

John

does anyone know if the couplers used for the thomas cars can be used on other non-thomas car. Specificaly i'm look to use Bachmann track cleaning cars with one of the engines.

I have recently bought a MRC 1669 decoder and would like some help in figureing out what type and size light buld to use with it and if I need to use a resistor
thanks

Hey Bachmann
looking at on of the 36" tracks it appear the it is actually 2 18" pieces of roadbed with single track holding it togethter. Have you ever considered selling the 18" peices seperatly.
one other question, the new turntable mentions DCC. Is it DCC compatable or DCC controled. If not could a DCC decoder be used to control it

thanks

John

OK Mr Bachmann
know you got me thinking. With the announcement of your new motorized turntable. I need to know will it replace or work with the manual turntable that comes with the Tidmouth shed kit. My other question is, you state that it works with DCC does that mean a DCC controler can operate it

Is there any chance you might sell the Tidmouth Shed with this new turntable

thanks
John

is it possible to put one of the couplers for the Thomas line on a track cleaning car so I could have one of those engines pull this car or should I just get a regular engine with that type of coupler

I'm thinking of setting up a programming track as a spur line on my layout. I want to use a MRC Dispatch Decoder to activate a DPDT relay to switch power to the track between main and programming I will use a section of track with a gap.
Should I consider doing anything else to this set up so I don't do any damage to any other parts of the setup

thanks for any helpful information

John