Does anyone know the diameter of the drivers (not the prototype) in either in mm or inches on the model?

Does anyone know how to remove the trucks from the GP40.  This is the version that the top half of the frame can be removed to expose the drive train and motor - I need to get in and clean the wheel pickups and chassis pickups.

Has anyone replaced the Rapido couplers with the Bachmann E-Z Mate knuckle couplers? If so did you use the 502 or 503 versions?

Dose anyone know of a source for 2-8-0 Connecting Rod Screws, the online parts listing doesn't reference any?  Any help will be appreciated, even a size will help.

Has anyone ever purchased from TK Trains & Hobbies?

What size Bachmann knuckle coupler (Long Medium or Short) should you use when replacing the Rapido couplers on the "Old Timer" series cars and the 4-4-0 locomotives?

Has anyone on the forum ever take the tender apart on the 4-4-0?  What are the pit falls aside from the springs between the trucks and the brass pick up plates?  I couldn't find any diagrams for this engine.  Thank you in advance.    John

Has anyone ever taken apart the circa 1860's Bachmann passenger cars. I went to a train swap sale and a fellow was selling interior configuration kits for passenger cars, so I bought several. Now I'm concerned that I make break them taking them apart - any suggestions.

Has anyone had any success removing factory glued Engineers from their cab floors without cutting them out? Anyway to "unbond" the glue?

Does anyone have an idea as to how to match the yellow on the Annie 4-6-0 Bumble Bee?

I have about 12 or so sets of knuckle couplers ( assorted manufacturers ) that I wolud like to swap for hook and loops, if enterested E-mail me to arrange a swap......