BACH -Man; what is the scheduled delivery of the F7 DCC & SOUND Locos ?  Any word yet?

   
          Does anyone know the minimum radius for the #50901 Berkshire loco? I have checked on line catalog without luck. Thanks

      Does anyone know minimum track radius for this Loco ?

   I have Bachmann GP40,GP38-2 and a FT-A All are DCC controlled. What I was wondering is if there are sound decoders available for each of them and would a sound unit fit in these locos.Has anyone done this? your input is appreciated.

         Info needed; I tried changing the address on my Bachmann GP40 ,DCC loco, from a two digit to a four digit and it seems to accept the change,but,it won`t function.However,when I go back to two digit (02) it works.Tried this several times and had same results.
         I am using a "Digitrax Zephyr Xtra" Dcc control system on a program track as per Digitrax instructions. Anyone have advice to give?

     Does anyone have a part number for the Red Universal power connector that comes with the Digital Command sets. I cannot find any reference on Bachmann site.

           Anyone know item # for the N/S E-Z track 18" curved re-railer w/power connector? the re-railer w/o power connector is 44529.
It is mentioned in description of non-powered type. to use with DCC power.

      I have two DCC engines, AT-A & GP-40 which I would like to lube,however, once the shells are off there is no easy access to the gear drives. I`ve been in model trains a long time and never seen where a field strip down had to be done in order to lubricate. Is this possible or is it that they do not need lube?
      Any advise?
                                              Thank you in advance, Happy New Year 

      I have recently purchased a digital commander set.Included were a Sante Fe FT-A and a Sante Fe GP40.I would like to remove the shells to lubricate the two units,however, Bachmann , does not give instructions on how to remove shells.Help would be appreciated, don`t want damage anything.Thanks.