ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
September 18, 2020, 11:33:34 PM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
  Show Posts
Pages: [1] 2 3
1  Discussion Boards / HO / Re: DCC issues. Forward = Reverse and Intermittent pick-up. on: May 01, 2013, 04:41:51 PM
Hi Roger If the loco is going in opposite direction try reversing the decoder it maybe backward Ken Black
2  Discussion Boards / HO / Re: Bachmann 2-10-0 lights on: April 29, 2013, 11:59:04 PM
Thanks Rich I got the rear light to work pipe not connected  the front does not work  Thanks Ken
3  Discussion Boards / HO / Re: Bachmann 2-10-0 lights on: April 28, 2013, 11:08:21 PM
It Is factory installed loco runs in right direction Could it still be backward ?
4  Discussion Boards / HO / Re: Bachmann 2-10-0 lights on: April 28, 2013, 12:51:02 AM
Yes I have used 0 but the lights do not work is there another cv I can use Ken
5  Discussion Boards / HO / Bachmann 2-10-0 lights on: April 27, 2013, 12:15:22 AM
I have a new bachmann 2-10-0  dcc and tsunami sound I can not get the head light or the rear light to work  ken
6  Discussion Boards / HO / Re: bachmann 2-10-0 headlight replace on: December 07, 2012, 01:12:10 PM
ok i will reword my question how do you replace the light?
7  Discussion Boards / HO / bachmann 2-10-0 headlight replace on: December 07, 2012, 01:45:24 AM
I have a bachmann 2-10-0 with a high head light that needs replacement is this a easy fix
8  Discussion Boards / HO / Re: ho sy mikado 2-8-2 on: November 30, 2012, 02:22:27 PM
I have 28mm speakers they are too big for the sy 2-8-2 tender and too thick the 2-8-2 tender is smaller than a 2-8-0 tender
9  Discussion Boards / HO / Re: ho sy mikado 2-8-2 on: November 21, 2012, 01:37:23 AM
The 28mm is too big for the small 2-8-2 tender has anyone put a speaker in this tender
10  Discussion Boards / HO / Re: Sound decoder etc., for a Spectrum Light Mountain on: November 20, 2012, 05:59:42 PM
Hi Roger I have use the MRC decoder with a 28mm speaker for my heavy mountain works fine It all fits in the the long tender with no problem If you want to see it give me a call Iam not far away Ken
11  Discussion Boards / HO / Re: ho sy mikado 2-8-2 on: November 20, 2012, 05:55:38 PM
Thanks I have one works great What size speaker would you use?
12  Discussion Boards / HO / ho sy mikado 2-8-2 on: November 20, 2012, 01:43:52 AM
I have a bachmann sy mikado 2-8-2 ddc ready I am looking for a sound decoder and speaker that will fit in the tender does MRC make one?
13  Discussion Boards / HO / ho 2-8-0cc on board on: February 23, 2012, 06:22:10 PM
I got a replacement 2-8-0 from bachmann it ran about 10 feet and then stopped  noticed it was out of QuarterSo I phoned bachmann they happily sent me a replacement New one arrived same problem I think I will fix this one myself Anyone else have this problem It seems the wheels are loose on the gear shaft causeing them to turn independent of each other in other words the right can slip without the left moveing I put them back in Quarter a used lock tight  works fine now Ken
14  Discussion Boards / HO / Re: ho 2-8-0 #1connector on: November 22, 2011, 01:55:23 PM
Thanks Johnathan Your pictures and instructions are great felt like you were right here helping me Thank You Ken
15  Discussion Boards / HO / Re: Lighting buildings on: November 22, 2011, 01:17:41 AM
I use a noma power supply for outside lights I have put a dimmer switch in the curcuit a head of the supply so I can dim the lights I have over 40 lights. I use old automotive lights from dash boards free from my auto wrecker also use the holders they 2 copper strips you can solder wires to and place under your buildings
Pages: [1] 2 3
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!